Serial 

HVFK6-XQR33-PTW2H-VK6CX-TT738
[ add comment ] ( 9 views ) $star_image$star_image$star_image$star_image$star_image ( 3 / 15 )
Pair Logitech on Linux 

From https://www.raspberrypi.org/forums/viewtopic.php?t=66099

I had a quick look, and it appear that Solaar is written in Python, so that is good. In general most repositories (mostly unless they say otherwise) will be targeted towards Intel X86 computers. Binaries from these repositories will be incompatible with the Raspberry Pi as it uses an ARM processor. It is worth a try, there may be no binaries in the repositories.

To create the file, in a terminal type:-

Code: Select all

sudo nano /etc/apt/sources.list.d/solaar.list

Add the two lines:-

Code: Select all

deb http://pwr.github.io/Solaar/packages/ ./
deb-src http://pwr.github.io/Solaar/packages/ ./

And save the file. Then use the following commands to install

Code: Select all

sudo apt-get update
sudo apt-get install solaar

Note: I am guessing somewhat here. Alternatively, you might be better off installing from the github repository. You can do this using the following commands:-

Code: Select all

sudo apt-get update
sudo apt-get install git-core
git clone https://github.com/pwr/Solaar.git
cd pwr
sudo python setup.py install
[ add comment ] ( 133 views ) $star_image$star_image$star_image$star_image$star_image ( 3.1 / 70 )
Mesa 5I25+7I77 to linux cnc PncConf 

1. Download http://sail4fun.lt/Downloads/5I25.tar
2. Extract as root 5I25 to /lib/firmware/hm2
3. Extract as root hostmot2-firmware-5i25 to /usr/share/doc
[ add comment ] ( 99 views ) $star_image$star_image$star_image$star_image$star_image ( 3 / 68 )
Ivairus manualai 

[ add comment ] ( 102 views ) $star_image$star_image$star_image$star_image$star_image ( 2.9 / 67 )
Uzrasiukai OpenVPN i DD-WRT Linksys 1900AC 

[ 1 comment ] ( 298 views ) $star_image$star_image$star_image$star_image$star_image ( 3 / 350 )

| 1 | 2 | Next> Last>>